GTA announced Balance of Performance (BoP) for each car to be applied for Round 1 of the 2021 AUTOBACS SUPER GT series, the “Takanokono Hotel OKAYAMA GT 300km RACE”. Please note that the contents from the bulletin below are excerpts selected for ease of understanding and they should not be taken as the actually released official bulletin. In case of a need for a precise interpretation, be sure to check the original bulletin.
(Blue underlines:Changes from the 2020 Round 8 at Fuji Speedway)
■GT500 Class
The fuel flow restrictor set at 90.2kg/h and the re-fueling device flow restrictor (internal diameter: 25.0 mm) are the same as those of the previous specifications.
■GT300 Class
The BoP regulations for the GT300 class FIA GT3 cars have been decide based on consultations between GTA and SRO (organizers of GT3 World Challenge Powered by AWS, etc.).
○GT300
* Minimum ground clearance: a 15 mm spacer shall be fitted between the reference plane and the skid block with a thickness of 10mm (±2mm).
○GT300 Mother Chassis
*A re-fueling device flow restrictor (internal diameter: 31.2 mm) will be adopted.
○FIA-GT3
○Maximum boost pressure
The above boost pressure has a boost pressure ratio, and the pressure level is calculated by applying that ratio to the standard air pressure announced by GTA. At each race event, the teams must adjust the maximum boost pressure in accordance with the local air pressure announced by GTA.